|
|
|
|
|
|
|
|
If you have the need for speed then this site is for you. The idea is simple, our parts will help you look good and win.
|
|
|
|
|
|
|
|
|
|
Porting
"For off road use only"
"The items here are standard mitsubishi items but applies to all similar items"
|
If we don't have what you want just ask and we can get it. |
|
|
Turbine housing Smooth uninterrupted air is going to outflow the stock step and rough casting of your Turbine Inlet. Porting allows a greater volume of exhaust gases to be pushed into the turbine inlet, final polish keeps that exhaust gases flowing smoothly down and around the turbine wheel. This smoother area allows greater performance gains depending on each application. IMW will port the inlet and remove the step followed up by a polishing to insure a super smooth flow. Turbine housing $50.00+SH both ways |
|
|
|
The stock rough casting of your OEM O2 housing is a real restriction in the exhaust system. Exhaust gases change directions and flow against the uneven cast surface cause unwanted restrictions. Porting at IMW involves safely opening every crevice to allow for maximum flow, followed by a finish polish. $65.00 +SH both ways |
|
|
|
IMW will port match to your choice of gasket (6cm or 7cm) and open up the Exhaust runners. The smoother and easier the exhaust gas can move through the runners and collector, the quicker your turbo will spool thus minimizing turbo lag and increasing your ability to make more power. After the porting, everything is polished out for great airflow. Stage I Exhaust manifold porting Stage I is ported to match the 7cm gasket. $35.00 +SH both ways Stage II Stage II is ported to match the 7cm gasket and roughly 3 inches into each runner. $65.00 +SH both ways |
|
|
|
34 mm flapper IMW will open up the waste gate passage and install a 34mm flapper that is much more efficient than the stock size. This modification is great at controlling "Boost Creep" caused by high flowing setups. $45.00
|
|
"We will do special pricing for car clubs and group buys."
|
Get your own site.
|
As most of our parts will effect emissions and or local State / Federal laws we ask that you use these parts for
"For off road use only"h
